DIY Jewelry

DIY Wrapped Metallic Thread Bracelet

DIY Wrapped Metallic Thread Bracelet
Are you ready to make bling?! Let’s make this awesome bracelet! You’ll need a wood bangle, DMC Metallic Embroidery Floss, acrylic paint, a foam paint brush, craft or fabric glue, scissors. Depending on your color choices, you may want to paint your bangle in a complimentary to minimize any peeks of wood through the floss.... 
MORE PICTURES
DIY Jewelry

Perfect DIY Jump Ring “Coil” Bracelet

Perfect DIY Jump Ring “Coil” Bracelet
This bracelet looks very difficult to make, but it’s not true! It’s actually just a ton of jump rings. You will need glue, 300 or so 10 mm brass jump rings, clasp, two brass barrel end caps and rope. Begin by using a little glue to add your first end cap. Let it dry for... 
MORE PICTURES
DIY Jewelry

Delicate DIY Wire Felt Bead Necklace

Delicate DIY Wire Felt Bead Necklace
Today we’ll make a super cute and easy necklace with your own unique bead with wire and felt. You don’t have to be an experienced jewelry maker to create these stunning necklaces so grab a couple of your friends for some fun crafting, and let’s get started. Thee supplies are bead chain, gold wire, merino... 
MORE PICTURES
DIY Jewelry

Simple DIY Wire Chain Bracelet

Simple DIY Wire Chain Bracelet
It’s simple and fast! This little accessory will add some charm to your look. You will need 16-gauge wire, chain, needle nosed pliers, round nosed pliers and wire cutter. First cut a piece of the chain that is as wide as your wrist. Next, cut a piece of wire that would fit around your wrist,... 
MORE PICTURES
DIY Jewelry

Stylish DIY Button Pendant Necklace

Stylish DIY Button Pendant Necklace
Got a couple of old buttons? Let’s give them a second life with these necklaces! You’ll need normal-sized buttons, 14 mm cabochon trays, E6000 glue, wire cutters, jump rings and a necklace chain. First, look for some buttons the same size as your cabochon tray. After choosing your button, proceed to cut the shank behind... 
MORE PICTURES
DIY Jewelry

DIY Fishbone Chain Crystal Bracelet

DIY Fishbone Chain Crystal Bracelet
This bracelet is very beautiful and look unusual; to make one you’ll need gold fishbone chain, sew-on crystal jewels, jumprings & clasp, a wire cutter & jewelry pliers. Measure the fishbone chain to fit tightly around your wrist. Then split that piece into two longer and two shorter pieces. Using the pliers and jumprings, attach... 
MORE PICTURES
DIY Jewelry

Creative DIY Resin Thread Spool Bracelet

Creative DIY Resin Thread Spool Bracelet
I’m sure that all crafters and embroiders will be happy with this bracelet as it’s made of spools! You’ll need epoxy resin, mold release and conditioner, 9 mini wooden spools, ⅝” tall x ½” diameter, spray acrylic sealer or Mod Podge, colorful thread or embroidery floss. Gripping each spool firmly with needle-nose pliers, use a... 
MORE PICTURES
DIY DIY Jewelry & Accessories Jewelry

Romantic DIY Pearl Cluster Earrings

Romantic DIY Pearl Cluster Earrings
Sometimes you need accessories that will show your romantic and gentle nature. So these earrings will add chic and beauty to your style. You will need pearls (at least 20, in varying sizes and shades), 3-in-1 jewelry pliers, pair of earring hooks, chain (about 4 inches/10.16 centimeters total) and head pins (at least 20). Slide a... 
MORE PICTURES
DIY Jewelry

Lovely DIY Geometric Clay Necklace Pendant

Lovely DIY Geometric Clay Necklace Pendant
This accessory will make your winter look complete. You will need air-dry clay, exacto knife or other small sharp knife, long sewing pin or unbent paper clip, head pin, needle nose pliers and gold leafing kit. Form your pendant. Grab a piece of clay a bit larger than you want your finished pendant to be.... 
MORE PICTURES