These earrings are an easy-to-make accessory and they’ll add freshness and chic to your look. You’ll need 2 1.25″ brass discs, 2 20mm gold filled hoops, 4 4mm gold filled jump rings, 1 big eye threading needle, metal hole punch, metal shears, embroidery floss, emery board and sharpie or permanent marker. Start by taking a pair of metal shears and cutting off a section of the brass disc. After cutting both pieces down to the same size, file down the cut edges with an emery board. With a Sharpie or permanent marker, mark 2 dots at each corner of the cut edge. Then, make a series of evenly spaced dots around the bottom of the circular disc. Next steps of the tutorial are here.