If you have various fabrics and materials, you can always create something original, for example, these cuff bracelets. You will need leather cord, 2 or 3 steel snaps, snap setter, hammer, 2 leather scraps (2 3/4″ by 3 3/4″), doublestick tape and holepunch. First cut cord into 8 strips measuring about 7″ long. Stick a strip of doublestick tape on the edge of your leather scrap. Then stick pieces of leather cord on the tape, 1/4″ apart. Now line them all up. Then you should fold over the leather piece on top of itself and press down. Stitch around leaving a 1/8″-1/4″ at the edges and backstitch at each end. Use a hole punch to make 2 or 3 holes in the leather. Continue to read the instruction here.