Original DIY Jewelry Display

DIY Original Jewelry Display

It’s very an inexpensive project, you can make a panel for your jewelry and other things, for example, bags. You’ll need 1 panel of pine measuring 3/4″ x 20″ x 48″, a drill, a pen, primer, spray paint or latex paint in your favorite color, 1/2″ screw hooks for jewelry, 1″ screw hooks for handbags, sand paper. Place your panel of wood on the floor and arrange your jewelry as you’d like it to hang. Be sure to space hooks about 2″ apart. Make marks where your screws will go. Carefully drill about 1/2″ into the wood. Be sure you don’t drill through. Your board should be pre-sanded but lightly sand it again and wipe it down to be sure your paint sticks easily. Paint a layer of white primer on the front and edges of your board and let it dry. Paint two layers of your paint color of choice and then add your screws. The great thing about this is you can change it up as your tastes or space needs change.

2 of 4
Original DIY Jewelry Display
3 of 4
Original DIY Jewelry Display
4 of 4
Original DIY Jewelry Display
Source: abeautifulmess